Home Technology & Security

Smart devices fail at the install.
We install and configure smart locks, security cameras, and home network connections so your home stays protected and everything works the way it's supposed to.
What's included
- Smart lock installation and configuration
- Security camera mounting and setup
- Doorbell camera installation
- Home network access point mounting
- TV and monitor wall mounting
- Smart home device installation and integration
Most smart-home frustration has nothing to do with the app. The smart lock jams because the deadbolt never threw cleanly, even when it was manual. The video doorbell drops offline because the old doorbell transformer can't power it. The camera on the back of the house can't reach the Wi-Fi through a plaster wall. Each one is a carpentry, power or signal problem dressed up as a tech problem, and older Seattle houses have plenty of all three.
That's the gap I fill: someone who understands both the house and the device.
Quick answer: Crest & Level installs and configures smart locks, video doorbells, security cameras, Wi-Fi access points and mesh systems, smart home devices, and wall-mounted TVs and monitors for Seattle homes. Doors are tuned so locks throw freely, devices are mounted solid and weather-sealed, and any new wiring or transformer work is done by a licensed electrical contractor.
What the box doesn't tell you
Smart locks
A motorized deadbolt has a fraction of the force of your hand. If the bolt has to be pushed or lifted to lock, the smart lock will stall and drain its batteries. The door gets fixed first: the strike is realigned, the jamb is shimmed or hinges are reset so the bolt slides freely, and weatherstripping is adjusted so it doesn't fight the latch. Older doors may need the bore or backset corrected to fit modern hardware. On doors that swell in Seattle winters, I check the fit in the wet season, not only in August. Door repair details are on the Doors & Windows page.
Video doorbells
Wired doorbells need the right voltage from the doorbell transformer. Many older homes have transformers too weak for a video doorbell, or chimes that won't work with one. Battery models avoid the wiring but need regular charging. Replacing a transformer is electrical work, so I coordinate it with a licensed electrician. I also handle mounting on old trim or shingles, using a wedge mount to angle the camera toward the walk, and sealing it against wind-driven rain.
Security cameras
Where a camera goes matters more than which camera you buy. Cover the approaches to doors and the side yards. Mount out of easy reach. Keep the lens out of the line of rain coming off the eaves. Wireless cameras need a strong signal where they're mounted, which brings up the next problem.
Wi-Fi and access points
Plaster-and-lath walls block signal far more than drywall does, and plaster over metal lath, common in some older bathrooms and remodeled rooms, can stop Wi-Fi almost completely. Brick foursquares and concrete lower floors make it worse. The fix is usually a mesh system or wired access points placed where the signal is actually needed, not more power from one router in the corner. Running new network cable inside walls can fall under Washington's electrical rules, so I coordinate it with a licensed contractor when the job calls for it.
TV and monitor mounting
Mounted into framing or blocking, at the right height, with cables managed. Plaster walls and articulating arms are covered on the Home Office & Gym page.
Smart home devices
Hubs, sensors, smart plugs and thermostats connected and configured to work together, with you shown how to use them before I leave. I don't sell monitoring contracts or lock you into a brand. I'll set up whatever system fits your house and how you live.
Who does which part
Washington regulates electrical work closely. In practice:
- I handle directly: door and lock fitting, mounting cameras, doorbells, access points and TVs, battery-powered and plug-in devices, device setup and configuration, and the carpentry and weather-sealing around all of it.
- A licensed electrical contractor handles: new circuits and outlets, transformer replacement, hardwired fixtures, and in-wall wiring. In Seattle, those permits and inspections go through SDCI.
You still have one point of contact, and the parts that need a license get done by someone who holds one.
Security that's also accessible
Smart locks and video doorbells are some of the most useful aging in place tools. They let someone answer the door from a chair, let family check in, and remove the struggle with a key in a stiff lock. Keypads and lever-style locks help anyone with limited grip. See Aging in Place Modifications. Gates can get the same treatment. A keyed long-throw gate lock is in Fence Gate Hardware Has Come a Long Way.
When it's bigger than us
Whole-house structured wiring, monitored alarm systems with professional monitoring contracts, and anything requiring new circuits are jobs for licensed electrical and low-voltage contractors. If your project is heading that way, I'll tell you early and point you to people I trust.
What to expect
- First visit: I walk the house with you, look at the specific problem and what's around it, and tell you plainly what I'd do and what I wouldn't.
- Estimate: A written, itemized scope, including what's likely to change once a wall or floor is opened. Why I don't rely on fixed bids.
- Scheduling: I will provide an accurate plan for scheduling and completing the work.
- Cleanup: Dust containment as needed with your house left clean every day.
Home technology questions I hear most
Why does my smart lock keep jamming? Usually the deadbolt doesn't slide freely. The strike is misaligned or the door has moved, so the motor can't throw the bolt. Realigning the strike or adjusting the door so the bolt moves with a fingertip fixes most jams and extends battery life.
Will a video doorbell work with my old doorbell wiring? It depends on the transformer. Many older homes have transformers too weak for video doorbells. A battery model avoids the issue, or the transformer can be replaced by a licensed electrician.
Why is my Wi-Fi so bad in an old house? Plaster-and-lath walls, especially plaster over metal lath, and brick and concrete block wireless signal far more than drywall does. A mesh system or wired access points placed where you need coverage usually works better than a stronger router.
Can you install a smart lock on my existing door? Usually, yes. The door may need its bore, backset or strike adjusted to fit, and it should close and lock smoothly by hand before the smart lock goes on.
Related reading
- Doors & Windows for entry doors and locksets
- Fixture Installation for door hardware and lighting
- How can I make a kitchen safer for elderly parents?
- Plaster, brick and old framing on Queen Anne
Let's look at it together
Call or text (564) 444-8388 and tell me what you'd like to set up, or schedule a visit.

