· By Mark Tindall
Custom cedar entry gate with a reversed swing, Queen Anne

The short version
On a Queen Anne house built around 1930, the old side-yard gate had sagged until it was nearly impossible to use. I built a new cedar gate and reversed the direction it swings, so passing through is easier and more intuitive, then fitted a keyed long-throw lock. It took three days on site.
Project facts
- Neighborhood
- Queen Anne
- House built
- Circa 1930
- Service
- Fencing & Decks
- Materials
- Cedar gate with Z brace and anti-sag cable, GateMate Long Throw gate lock
- Suppliers
- Dunn Lumber (cedar); Amazon (GateMate lock)
- Time on site
- 3 days
The problem
This side-yard gate is the main way in from the alley for the homeowner of this Queen Anne house, built around 1930. Over the years the old gate had sagged until it was nearly impossible to use, and the latch was a flimsy galvanized bolt you had to reach over the top to work.
How I did it
Build a new gate rather than patch the old one. A gate that has sagged that far has usually racked out of square for good. The new one is cedar, with a Z brace and an anti-sag cable to keep it square.
Reverse the swing. I changed which way the gate swings, so passing through it is easier and more intuitive than it was with the old gate.
Upgrade the hardware. The new gate has a GateMate Long Throw lock: keyed from the alley side like a front door, with a long-throw bolt and an easy turn knob on the inside. No reaching over the top, and no grip strength needed. I wrote more about it in Fence gate hardware has come a long way.
Materials and timing
The cedar came from Dunn Lumber, and the lock from Amazon. The job took three days on site.
More photos

Related
Get started
Have a project like this?
Call or text and tell me what's going on, or schedule a visit.