Seattle neighborhoods
Before You Call Anyone About Your Capitol Hill House
Crest & Level works throughout Capitol Hill, from Millionaire's Row and the Harvard-Belmont blocks to the brick condo buildings near Broadway.
Capitol Hill homes are some of the oldest and most altered in Seattle, and the first conversation goes much better when you've looked at a few things yourself. Before you call me, or anyone else, take ten minutes to check:
- Is your house in the Harvard-Belmont Landmark District? If you're on the west slope between roughly Broadway and the freeway, check. Exterior work there needs City approval before it starts.
- Is it a condo? Pull out your HOA rules. Flooring, windows, doors and anything touching a shared wall often need board approval, sometimes with specific products or sound ratings.
- Where are the water stains? Look at the ceiling under bathrooms, around radiators, and on the plaster beside the chimney. Their location tells me more than any description.
- Which doors stick, and when? Every winter, or only after a big storm? Upstairs or down? Sticking doors are how an old house shows you where it has moved.
- What's original? Note the trim, doors, built-ins and hardware you want to keep, even if they're painted over. I'd rather plan around them than replace them.
Quick answer: Crest & Level handles finish carpentry, plaster-wall repair, trim and millwork matching, doors and windows, tile, closet systems and aging in place modifications for Capitol Hill homes and condos. We work within Harvard-Belmont Landmark District and HOA rules, coordinate with heating, masonry and roofing specialists when needed, and source period materials from Seattle suppliers like O.B. Williams and Earthwise Architectural Salvage.
Then, now and what I do about it
Capitol Hill was built out quickly after James Moore began developing it around 1900: the mansions of Millionaire's Row on 14th Avenue East, built between 1902 and 1915, then streets of foursquares, Craftsman homes, Tudor and Colonial Revival houses, and brick apartment buildings closer to Broadway. A century of owners, tenants and conversions has layered changes on top of those original houses. Here's how that history shows up in the work.
Plaster walls
Then: Three-coat plaster over wood lath, with picture rail, deep casings and crisp corners. Now: Cracks running from the corners of doors and windows, bulges where the plaster has let go of the lath, and decades of patches in three different textures. What I do: Re-attach loose plaster to the lath with plaster washers and adhesive before patching, so the repair doesn't crack again next winter. Then I patch with materials that blend with plaster rather than drywall mud, and match the existing finish. When an opening is cut for a new door or a closet system, I cut the plaster back cleanly so the surrounding wall stays sound.
Radiators
Then: Hot water or steam heat, with cast-iron radiators under the windows. Now: Many still work beautifully, but a slow drip from a valve or pipe joint, sometimes for years, rots the subfloor and finish floor beneath it. You often can't tell until a floor board feels soft or a stain shows up on the ceiling below. What I do: Have a heating contractor fix the leak, drain the system or disconnect the radiator, then cut out and replace the rotted subfloor and patch the finish flooring. Radiators are heavy and the connections are old, so I don't move them myself. I can build radiator covers and window seats that leave room for the heat to get out.
Brick, chimneys and the plaster beside them
Then: Brick chimneys, brick foundations, and on some blocks, brick apartment buildings. Now: Water gets in at failed chimney flashing or deteriorated mortar, shows up as stains or blistering paint on the plaster beside the chimney, and eventually loosens trim nailed into the masonry. What I do: Send you to a roofer or mason first. Fixing the plaster before the water is stopped just means fixing it again. After that, I repair the plaster and re-anchor trim with masonry fasteners into the brick, not nails into soft mortar joints. Tacoma Screw Products in Georgetown stocks the concrete and masonry anchors I use for that work.
Built-ins, doors and stairs
Then: Fir and oak built-ins, five-panel and multi-light doors, solid stair railings and balusters. Now: Painted, sometimes removed, sometimes cut down to fit openings that have settled. Glass knobs and mortise locks replaced with whatever was handy. What I do: Repair rather than replace wherever possible: rehang doors in frames squared back up, rebuild drawer runners, tighten railings. When pieces are missing, I start at Earthwise Architectural Salvage in SODO, which has been salvaging doors, hardware, lighting and trim from Seattle's old buildings since 1991. When salvage can't match, O.B. Williams, a few minutes away in SODO, builds custom millwork, doors and windows, and Limback Lumber replicates trim profiles from a sample.
Condos and apartment conversions
A lot of Capitol Hill living happens in older brick buildings converted to condos, and newer buildings along Broadway and Pike/Pine. Condo work is mostly finish carpentry and bathrooms, and it comes with its own rules:
- Floors: Many HOAs require a minimum sound rating for hard flooring, which means a specific acoustic underlayment under new tile or wood. Find out before you choose the floor.
- Bathrooms: Showers get a continuous waterproofing system behind the tile, because a leak in a condo affects your downstairs neighbor too. I check the subfloor and the bath fan duct while everything is open.
- Shared walls and building systems: Plumbing risers, fire-rated walls and anything structural belong to the building, not the unit. I work around them and coordinate with your HOA when we need access.
- Closets and storage: Small units with high ceilings are made for built-in closet systems and storage that uses the full height of the room.
The Harvard-Belmont Landmark District
On the west slope of Capitol Hill, the Harvard-Belmont Landmark District was designated in 1980 to protect a neighborhood of fine early-1900s homes. Within the district, a Certificate of Approval from the Landmarks Preservation Board is required before exterior alterations. That includes changes to stairs, fences, walls and landscaping, along with work on the buildings themselves. The district's Application Review Committee reviews proposals before the board does.
Interior work like plaster repair, trim, tile, closets and painting doesn't need a Certificate of Approval. Exterior work like replacing porch stairs, changing a fence, swapping windows or adding a railing needs to be planned around the review timeline. I'll help you figure out which side of that line your project falls on before we schedule anything.
Millionaire's Row on 14th Avenue East is a different case. Its 2021 National Register listing recognizes its history but doesn't add a local review process, although several individual houses there are designated Seattle landmarks, and those do require approval.
When it's bigger than us
Heating systems, masonry, roofing, structural changes and seismic work are specialty contractor and engineer work. If your project is heading that way, I'll tell you early and point you to people I trust, rather than stretching a handyman scope over it.
On a hill with some of the steepest streets in Seattle, plenty of houses have long stairs up from the sidewalk, and a second handrail is often the simplest fix. If getting in and out is getting harder, an aging in place assessment is a good place to start.
What to expect
- First visit: I walk the house with you, look at the specific problem and what's around it, and tell you plainly what I'd do and what I wouldn't.
- Estimate: A written, itemized scope, including what's likely to change once a wall or floor is opened. Why I don't rely on fixed bids.
- Scheduling: I will provide an accurate plan for scheduling and completing the work.
- Cleanup: Dust containment as needed with your house left clean every day.
Capitol Hill questions
Do I need approval to work on my house in the Harvard-Belmont Landmark District? For exterior changes, yes. A Certificate of Approval from the Landmarks Preservation Board is required before exterior alterations, including stairs, fences, walls and landscaping. Interior work like plaster repair, trim, tile and painting doesn't need one.
Can you repair cracked plaster instead of replacing it with drywall? Usually, yes. Loose plaster gets re-attached to the lath with plaster washers and adhesive, then patched with compatible materials and finished to match the surrounding wall. That keeps the original wall and avoids the mismatch of a drywall patch.
My floor is soft next to the radiator. What happened? Most likely a slow leak from the radiator valve or a pipe connection has rotted the subfloor. A heating contractor should fix the leak and disconnect the radiator. Then the damaged subfloor and flooring can be replaced.
What should I check before replacing the floor in my Capitol Hill condo? Your HOA rules. Many require a minimum sound rating for hard flooring, which means a specific acoustic underlayment, and some require board approval before work starts.
Let's walk through it
I'm on Queen Anne, a short drive across town. Call or text (564) 444-8388 and tell me what's going on with your house, or schedule a visit.
What we do in Capitol Hill
Cabinetry and Finish Carpentry
Custom shelving, trim, and built-ins fabricated and installed to match the character of your home.
Learn more →
Doors & Windows
New doors and replacement windows installed cleanly and finished to match your existing trim and hardware, so everything looks like it was always meant to be there.
Learn more →
Kitchen & Bath Updates
We handle the upgrades that make your kitchen and bath feel new again — cabinet hardware, pullouts, light fixtures, mirrors, toilets, and tile repair and installation.
Learn more →
Painting
Precision roll, brush, or spray painting for walls, ceilings, trim, and cabinets with a clean and lasting finish.
Learn more →
Closet & Entryway
From custom shelving to built-in seating, we design and install storage solutions that turn your closet and entryway from chaotic into completely dialed in.
Learn more →
Aging in Place Modifications
We install grab bars, accessible toilets, ramps, wider doors, and updated hardware and electrical to make your home safe and comfortable.
Learn more →
Guides for Capitol Hill homeowners
Why Capitol Hill homeowners work with us
Licensed, local, and built for this neighborhood.
Licensed, bonded & insured — License #CRESTLH742JA
20+ years of carpentry and craft experience
Local to Capitol Hill, based on Queen Anne