Crest & Level

Fixture Installation

Fixture Installation

The details you touch every day.

Light fixtures, switches, receptacles, door and window hardware, towel bars. We swap out the details that date your home and replace them with ones that don't.

What's included

  • Light fixture replacement and installation
  • Dimmer switches and smart switches
  • Outlet and receptacle upgrades
  • Towel bars, toilet paper holders, and bath hardware
  • Door knobs, pulls, and locksets
  • Ceiling fans with light kits

Walk through your house and count how many times a day you touch a fixture: the front door knob, the light switch, the cabinet pulls, the towel bar, the toilet paper holder. These small things date a house faster than anything else, and they wear out first. Replacing them is one of the most noticeable updates you can make for the money. But it only looks good if each one is installed straight, solid and in the right place.

Here's a five-minute check you can do yourself before you call:

  1. Door hardware. Do the knobs wobble? Do doors latch without a push? Are the knobs a mix of three decades?
  2. Cabinet pulls. Are any loose, misaligned or mismatched? Do the old screw holes show?
  3. Bath accessories. Has the towel bar pulled out of the drywall? Is anyone using it as a grab bar?
  4. Lighting. Are there rooms with one dim ceiling fixture, or switches in the wrong place?
  5. Ceiling fans. Do they wobble, click or hum?

Quick answer: Crest & Level replaces and installs door knobs, levers and locksets, cabinet pulls and knobs, towel bars and bath accessories, mirrors and medicine cabinets, and coordinates light fixtures, dimmers, receptacles and ceiling fans for Seattle homes. Hardware is anchored into framing or blocking, old holes are filled and finished, and wired fixtures are installed by a licensed electrical contractor.


Hardware and wiring are two different jobs

In Washington, almost anything involving household wiring, including replacing a light fixture, switch, receptacle or ceiling fan, is regulated electrical work. It's done by a licensed electrical contractor with certified electricians. In Seattle, electrical permits and inspections come through SDCI. So I split fixture work into two parts:

  • Hardware and accessories I install directly: door hardware, cabinet pulls, towel bars, bath accessories, mirrors, medicine cabinets, shelves and closet hardware.
  • Wired fixtures I coordinate: light fixtures, dimmers and smart switches, receptacles and USB outlets, and ceiling fans are wired by a licensed electrical contractor. I handle the parts around them: the blocking a heavy fixture or fan needs, patching the ceiling where an old fixture was, and the trim and paint afterward.

That way you get one point of contact, and the wiring is permitted and inspected the way it should be.


Notes by category

Door hardware

Old doors in Seattle houses often have mortise locks, or bores that don't match modern hardware. A new lever set may need the bore enlarged, a filler plate over old holes, or a new latch mortise. Lever handles are easier to use than round knobs for small kids, full hands and aging hands alike. See Aging in Place Modifications. Smart locks have their own install details, covered on the Home Technology & Security page.

Cabinet pulls and knobs

New pulls rarely match the old hole spacing. Old holes get filled and touched up, not hidden under a backplate unless you want the look. A drilling jig keeps every pull at the same height and spacing across the kitchen, because one crooked pull is the first thing anyone sees.

Towel bars, toilet paper holders and bath accessories

Towel bars come out of drywall because people lean on them. In bathrooms, I mount into studs or blocking wherever possible, and use anchors rated for the load where not. If someone is already using a towel bar for balance, it's time to install a real grab bar instead. Grab bars are built and rated to carry a person's weight, and towel bars aren't.

Mirrors and medicine cabinets

Heavy mirrors hang on cleats or rated hardware anchored to framing. Recessed medicine cabinets in older homes run into old wiring, plumbing vents and blocking, so I check the cavity before cutting.

Light fixtures and ceiling fans

A ceiling fan needs a fan-rated box fastened to framing, not the light-duty box that held the old fixture. In plaster ceilings, cutting for a new box takes care to avoid cracking the surrounding plaster. Heavy chandeliers need the same solid support. I plan that support and the ceiling repair, and a licensed electrician makes the connections.


Where the fixtures come from


When it's bigger than us

New circuits, panel work, recessed lighting layouts and anything else that adds to your home's wiring is electrical contractor work. Moving or adding plumbing fixtures needs a licensed plumber. I'll tell you early what your project needs and point you to people I trust.


What to expect

  • First visit: I walk the house with you, look at the specific problem and what's around it, and tell you plainly what I'd do and what I wouldn't.
  • Estimate: A written, itemized scope, including what's likely to change once a wall or floor is opened. Why I don't rely on fixed bids.
  • Scheduling: I will provide an accurate plan for scheduling and completing the work.
  • Cleanup: Dust containment as needed with your house left clean every day.

Fixture questions I hear most

Can new door levers go on old doors? Usually. Older doors may need the bore enlarged, a filler plate over old holes, or a new latch mortise, depending on the existing hardware. Original mortise locks can often be kept and fitted with new levers instead.

Why does my towel bar keep pulling out of the wall? It was likely mounted into drywall alone, and people lean on it. Remounting into studs or blocking, or with anchors rated for the load, fixes it. If someone uses it for balance, replace it with a grab bar.

Who can replace a light fixture in Washington? Replacing a light fixture is regulated electrical work in Washington and is done by a licensed electrical contractor. In Seattle, permits and inspections go through SDCI.

Will new cabinet pulls cover my old holes? Not always, because new pulls rarely match the old spacing. Old holes can be filled and touched up for a clean look, or covered with backplates if you like that style.


Related reading


Let's look at it together

Call or text (564) 444-8388 and tell me what you'd like to swap out, or schedule a visit.