Crest & Level

How much does window replacement cost in Seattle, and what affects it?

Quick Answer

Vinyl replacement windows in Seattle typically run $500–$1,200 per window installed; fiberglass and wood cost more. The biggest price factors are the material, insert versus full-frame installation, size and access, and any rot found when the old window comes out. If the frame is sound and only the glass or hardware has failed, a repair may be all you need.

From our work

Not every window problem needs a new window. On one job, a pane had failed, with the telltale haze inside the glass that can't be cleaned. I worked with Glass Doctor to replace the glass and upgrade it to low-E, then made and installed new exterior trim to match the style of the house. The frame stayed, the view cleared up, and the window looks like it was always meant to be there.

What drives the price

  • Material: vinyl is the most affordable; fiberglass runs about $2,000–$5,000 per window, and wood or wood-clad falls in between or above depending on the product.
  • Insert or full-frame installation: full-frame costs more because the whole unit, sill and casing come out (see below).
  • Size and shape: bay, bow, arched and other non-standard windows cost more.
  • Access: second-floor and hard-to-reach windows take more time and equipment.
  • Hidden conditions: wood rot or damaged framing is often found only once the old window is out.

For a whole-house project on a typical Seattle home (15–20 windows), budget $7,500–$18,000 for vinyl, and more for fiberglass or wood.

Vinyl, wood or fiberglass?

Material Strengths Trade-offs Best for
Vinyl Affordable, won't swell or rot, almost no maintenance Can't be painted to change color; less stable in big temperature swings Most everyday replacements
Wood or wood-clad The traditional look that suits Seattle's Craftsman and Tudor homes; clad versions need much less upkeep Unclad wood needs regular paint or stain, or it will rot in this climate Older homes where appearance matters
Fiberglass Very stable through Seattle's wet/dry cycles, paintable, long-lived Costs considerably more than vinyl High-visibility windows and long-term performance

For most Seattle homes, vinyl is the smart everyday choice and fiberglass is worth it where appearance or long-term performance matters most. When an original wood window can't be saved and has to match, O.B. Williams in SODO builds custom wood windows, and Dunn Lumber's Lake Union store has Marvin and Milgard showrooms for standard sizes.

Insert or full-frame replacement?

Insert (pocket) replacement sets the new window inside the existing frame. It's faster, less disruptive and less expensive, but it only works when the existing frame is sound and square, and the glass area ends up slightly smaller.

Full-frame replacement removes the old window, frame, sill and casing down to the rough opening. It's the right approach when the frame is rotted or out of square, or when you're changing the window size. It costs more and involves more finish work, but it allows proper flashing, insulation and air sealing at the opening.

When in doubt, go full-frame. Saving money with an insert in a compromised frame tends to come back around.

Repair or replace?

Repair is often the right answer when the problem is isolated:

  • A single pane is cracked or fogged from a failed seal. The glass unit alone can be replaced; for that, we often work with Glass Doctor.
  • Hardware is worn. Locks, cranks and balancers can be replaced without touching the frame.
  • The window is drafty but the frame is sound. New weatherstripping and sealing often solve it.

Full replacement makes sense when:

  • The frame is rotted, warped or out of square.
  • Failed seals show up across the house, a sign the units have aged out.
  • You're upgrading to double- or triple-pane glass for energy efficiency.

Will new windows lower my energy bills?

Usually, and especially in Seattle's older homes where single-pane windows are still common. The U.S. Department of Energy estimates that heat gain and loss through windows accounts for 25–30% of residential heating and cooling energy use.

For Seattle, look for:

  • Double- or triple-pane glass with argon or krypton gas fill
  • A low-E coating that keeps heat in during winter without blocking daylight
  • A low U-factor (lower means less heat loss) that meets Washington's energy code
  • ENERGY STAR certification for our climate zone, which most rebate programs require

Window replacement also recovers a meaningful share of its cost at resale, though the return varies by year, market and window type. For rebates, permits and hiring, see how to hire a window or door contractor. For doors, see door replacement costs.

Need Help?

Crest & Level repairs and replaces windows and handles the work that makes them perform: shimming, flashing, trim and sealing. See our doors and windows services or schedule a visit for an honest read on whether your windows need repair or replacement.

Get started

Ready to get started?

Reach out for an estimate. We'll talk through the scope and get back to you within 72 hours.